|
Velocity Range†
|
0.53 to 96.6 km/hr (0.33 to 66 MPH)
|
|
Accuracy‡
|
True velocity errors of:
-
<±5%
-
0.53 to 3.2 km/hr
-
(0.33 to 2 MPH)
-
<±3%
-
3.2 to 107 km/hr
-
(2 to 67 MPH)
|
|
Response, Output Speed
|
<200 milliseconds lag for “combo” filter selection; [dv/dt =6.4 km/hr/sec (4.4 MPH/sec)]
|
|
Turn ON/OFF Delay
|
<305mm (12 inches) distance traversed, typical
|
|
Footprint, Target
|
Elliptical, 305mm (12 inches) major axis [at 601mm (24 inches) mounting height]
|
|
Mounting Angle
|
35 ±5° depressed from horizontal [from target surface]
|
|
Mounting Height
|
457 to 1219 mm (18 to 48 inches) 610mm (24 inches) nominal [from target surface]
|
|
DC Power Requirements
|
+Vbatt (unregulated battery voltage)
+9 to +16 VDC @ <0.6 Amp
|
|
Output Signal Characteristics
|
VOH = (+Vbatt – 1.5 VDC) – 1.051 (IOH);
VOL < 0.7 VDC @ IOL <6ma;
IOSS (Source) = 13 ma [+Vbatt = 16 VDC];
IOSS (Sink) = 25 ma [+Vbatt = 16 VDC];
where:
-
VOH
-
High level output signal voltage in VDC
-
VOL
-
Low level output signal voltage in VDC
-
IOH
-
High level output source current in ma
-
IOL
-
Low level output sink current in ma
-
IOSS (Source)
-
Maximum output source current for output short to ground
-
IOSS (Sink)
-
Maximum output sink current for output short to +Vbatt
|
|
Output Frequency
|
Factory selectable options:
-
34.80 Hz/Km/Hr (58.94 Hz/MPH)
-
26.11 Hz/Km/Hr (44.21 Hz/MPH)
-
16.32 Hz/Km/Hr (27.64 Hz/MPH)
-
10.06 Hz/Km/Hr (17.034 Hz/MPH)
|
|
Output Response Time
|
Factory selectable options:
-
Slow/fast combo
-
Slow
-
Fast
-
Superfast
|
|
Output Stage Characteristics
|
Transient/short protected NPN transistor;
ZOH = 1051 ohms;
ZOL = 63 ohms;
where:
-
ZOH
-
High level output source impedance
-
ZOL
-
Low level output sink impedance
|
|
Microwave Frequency
|
24.125 GHz ±50 MHz (except the United Kingdom which is 24.300 GHz)
|
|
Microwave Power Level
|
5mw, nominal
|
|
Overall Size
|
10 x 10 x 31.1 mm (4″ x 4″ x 12.25″)
|
|
Weight
|
2.05kg (4.5 lbs)
|
|
Agriculture Environmental Requirements
|
Product is immune to reverse polarity, EMI and electrical transients such as load dump, alternator field decay, inductive load switching, etc.
Operational temperature: -40°C to +85°C. Environmentally durable, i.e., not affected by chemicals, dust, salt spray, rain, wash, and mechanical shock or vibration.
Reference: Dj Product Specification and DJ Environmental Specification – Class I [Instrumentation requirements for critical control systems]
|
|
Connector
|
Amp 206429-1
|
Pin 1
|
Black
|
Ground
|
|
Pin 2
|
Green
|
Signal Out 0-12 VDC
|
|
Pin 3
|
Red
|
+12 VDC Battery
|
|
Pin 4
|
N/A
|
Radar Presence
|
Note: Pin 3 and Pin 4 are jumpered at the connector.
|
|
Matching Connector
|
Amp 206430-2
|
